Blackout Drapery and Woven Wood Shades for a Greenwich, CT Primary Suite

Westchester Window Fashions

Westchester Window Fashions was called into a Greenwich, CT primary suite that needed one thing: elevation. The homeowner wanted the room to feel finished and restful, and the bare windows were doing neither.

The answer was layers – and this blackout drapery in Greenwich CT project shows what the right layers do for a bedroom. The suite already had the bones – dark-stained floors, a fireplace, tall windows on two walls – it just needed the windows dressed to match.

The base layer is a soft, light-filtering bamboo woven wood shade on each window. It warms up the glass, turns daylight into a glow, and gives the room privacy without closing it off.

Over the shades we hung pinch pleat blackout draperies – floor-length, full, and tailored – on Kirsch drapery rods in an elegant brass finish. The drapery adds the height and softness the room was missing, and when the panels close, the suite goes fully dark.

That layering is the real story. Soft, filtered light by day from the woven woods; complete blackout at night from the drapery. It’s why blackout drapery in Greenwich CT bedrooms so often ends up layered over a woven shade – one window, two jobs, no compromise.

To explore layered window treatments for your own home, browse our custom drapery and woven wood shades, see where we work in Greenwich, CT, or call us at 914-685-9336.

Pro Tip from the Installer:

Bedrooms are where layering earns its keep. A blackout drapery alone leaves the window bare all day while the panels are open; a light-filtering shade alone won’t darken the room for sleep. Put the shade inside the frame and the drapery on a rod mounted high and wide.

High draws the eye up and makes the ceiling feel taller; wide lets the open panels stack off the glass so you keep the whole view. Kirsch rods in brass handle the hardware side quietly – strong enough for full blackout panels, finished well enough to be part of the room.

Local FAQ:

How much does blackout drapery in Greenwich CT cost?

Blackout drapery in Greenwich CT is priced by window width, fabric selection, lining, and hardware. A layered primary suite like this one – pinch pleat blackout panels over bamboo woven wood shades on Kirsch brass rods – reflects custom fabrication across every window. Call Westchester Window Fashions at 914-685-9336 to schedule your in-home consultation.

Should I layer drapery over shades in a bedroom?

In a bedroom, layering is the most practical setup there is. The woven wood shade handles the day – filtered light and privacy – and the blackout drapery handles the night. This Greenwich, CT primary suite uses exactly that pairing: bamboo woven woods underneath, pinch pleat blackout drapery over the top.

What is pinch pleat drapery?

Pinch pleat is a classic drapery header where the fabric is gathered and sewn into structured pleats at the top. It hangs in even, tailored folds and draws smoothly on the rod – a more finished look than a casual panel, which is why it suits a formal primary suite like this one.

What brands does Westchester Window Fashions use for drapery hardware?

This Greenwich project hangs on Kirsch rods in a brass finish. We fabricate drapery through leading workrooms and carry hardware lines including Kirsch, and during your in-home consultation we bring fabric books and finish samples to you. Call 914-685-9336 to schedule.