Shutters with Motorized Blackout Honeycomb Shades for a Primary Bedroom in Armonk, NY

A traditional look for the primary bedroom

Motorized blackout honeycomb shades and classic shutters share the window in this Armonk primary bedroom. The homeowner wanted shutters to give the room a traditional feel, and the shutters did that well, with crisp white louvers and a solid frame that suit the space. What they could not do on their own was make the room fully dark, since some light still slips past the louvers and around the panels.

That last bit of light matters in a bedroom. Streetlights, early summer sunrises, and the glow from a neighbor’s window all find their way around shutter panels. The room needed a second layer that could deliver complete darkness without disturbing the look the shutters created. The window is tall and wide, and the bed faces it, so any stray light lands exactly where the sleeper’s eyes rest.

Motorized blackout honeycomb shades behind the shutters

Westchester Window Fashions paired the shutters with motorized blackout honeycomb shades, mounted behind them. By day the shades stay raised out of sight and the shutters carry the look. At night the shades come down to close off the light the shutters let through, with no cords to reach for behind the panels.

The two treatments were planned as one window, not two separate decisions. The shades sit inside the frame depth behind the shutters, so nothing crowds the room, and the blackout fabric runs edge to edge across the glass. The louvers give texture and tradition during the day; the honeycomb shade gives darkness at night.

The honeycomb construction also adds a layer of insulation at the window, a quiet bonus in a bedroom. Cellular fabrics trap air in their pockets, and the U.S. Department of Energy lists them among the most effective window coverings for reducing heat loss and gain. The room holds a steadier temperature overnight, which is part of sleeping well too.

Motorization earns its place here. The shades live behind shutter panels, where a cord would be awkward to reach, so a quiet motor does the work from a bedside remote. The shades lower evenly, stop where they should, and ask nothing of anyone half asleep.

Traditional by day, fully dark at night

The finished room keeps the classic look the homeowner asked for, and sleep no longer depends on how much light gets past the louvers. The shades stay out of the way until they are needed. In the morning they rise out of sight, and the shutters carry the room again. On weekends the shades can stay down a little longer, so sleeping in does not depend on the season. The whole system asks for almost no attention: the shutters dust like furniture, and the shades need nothing at all.

Layering treatments like this is often the right answer when one product cannot do everything a room asks. A shutter brings structure and tradition; a blackout shade brings darkness and insulation. Together they cover the full day, from the first light of morning to the middle of the night. The fabric was chosen in the room’s own light, held against the shutters so the two whites would sit together without one looking dingy next to the other.

For homes in Armonk and across Westchester County, pairing shutters with blackout honeycomb shades is a quiet way to get a traditional look and complete darkness in the same window. To see more of our work or plan your own project, call Westchester Window Fashions at 914-685-9336.